-------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:17135] [[60304,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:17135] [[60304,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:17772] [[60435,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:17772] [[60435,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19460] [[58747,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19460] [[58747,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19993] [[59238,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:19993] [[59238,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-35.local:20564] [[63787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20604] [[63747,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20604] [[63747,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21116] [[64259,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21116] [[64259,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21174] [[64457,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21174] [[64457,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22062] [[65361,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:22062] [[65361,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:22110] [[65313,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22110] [[65313,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22573] [[61778,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:22573] [[61778,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23353] [[62022,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23353] [[62022,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24344] [[63079,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:24344] [[63079,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24637] [[51522,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:24637] [[51522,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:24690] [[51469,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:24690] [[51469,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:25287] [[52152,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:25287] [[52152,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26130] [[53101,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:26130] [[53101,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26334] [[53153,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:26334] [[53153,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26720] [[49439,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:26720] [[49439,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:27440] [[49743,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:27440] [[49743,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:27676] [[50531,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:27676] [[50531,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28059] [[50404,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28059] [[50404,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28782] [[55569,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28782] [[55569,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29993] [[56406,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29993] [[56406,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30259] [[57164,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30259] [[57164,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30595] [[57084,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30595] [[57084,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31525] [[53850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31525] [[53850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:32508] [[55171,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:32508] [[55171,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:00455] [[43192,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:00455] [[43192,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01044] [[44395,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:01044] [[44395,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01270] [[44425,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:01270] [[44425,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02672] [[41743,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02672] [[41743,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03320] [[42375,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:03320] [[42375,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04666] [[47941,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:04666] [[47941,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05357] [[48530,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:05357] [[48530,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05787] [[49124,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:05787] [[49124,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06156] [[45427,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:06156] [[45427,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07130] [[45733,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07130] [[45733,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07410] [[46477,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07988] [[46667,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:07988] [[46667,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08762] [[35653,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:08762] [[35653,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08898] [[35773,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08898] [[35773,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09331] [[36108,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09331] [[36108,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09447] [[36248,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:09447] [[36248,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10261] [[33130,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10261] [[33130,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10386] [[33261,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:10386] [[33261,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11007] [[33664,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11007] [[33664,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11665] [[34030,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11665] [[34030,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11766] [[33929,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:11766] [[33929,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:11834] [[34629,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:11834] [[34629,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12753] [[39086,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:12753] [[39086,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13644] [[39987,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13644] [[39987,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13840] [[40815,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13840] [[40815,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:14454] [[37129,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:14454] [[37129,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:14579] [[37260,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:14579] [[37260,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:14701] [[36882,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:14701] [[36882,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16256] [[38655,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:16256] [[38655,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16373] [[38538,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16373] [[38538,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16564] [[59851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16564] [[59851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16600] [[59815,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:16600] [[59815,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:16693] [[59466,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16693] [[59466,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16741] [[59418,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16741] [[59418,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16820] [[59595,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:16820] [[59595,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:17121] [[60318,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:17121] [[60318,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:17380] [[60059,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:17380] [[60059,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18628] [[57787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18628] [[57787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18699] [[57460,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18699] [[57460,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19332] [[58107,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:19332] [[58107,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19831] [[58376,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19831] [[58376,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20437] [[59050,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20437] [[59050,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20857] [[63494,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:20857] [[63494,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:20937] [[63670,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:20937] [[63670,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21090] [[64285,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:21090] [[64285,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21257] [[64118,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21257] [[64118,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23109] [[62266,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:23109] [[62266,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23307] [[62068,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23307] [[62068,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23535] [[62096,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23535] [[62096,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-35.local:23869] [[62530,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:25025] [[51390,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:25025] [[51390,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:25332] [[52107,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:25332] [[52107,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26692] [[49467,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:26692] [[49467,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26826] [[49589,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:26826] [[49589,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:27365] [[50074,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:27365] [[50074,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:27583] [[49856,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:27583] [[49856,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28026] [[50181,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28026] [[50181,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28080] [[50383,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28080] [[50383,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28321] [[51166,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28321] [[51166,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28346] [[51141,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28839] [[55768,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28839] [[55768,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28879] [[55728,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28879] [[55728,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28897] [[55710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28897] [[55710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28963] [[55388,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28963] [[55388,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:28982] [[55369,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28982] [[55369,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29054] [[55297,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29054] [[55297,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29184] [[56191,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29184] [[56191,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29228] [[56147,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:29228] [[56147,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:29264] [[56111,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29264] [[56111,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29318] [[56313,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29318] [[56313,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29411] [[56220,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:29411] [[56220,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29495] [[55880,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29495] [[55880,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29529] [[55846,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29529] [[55846,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29632] [[55999,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29632] [[55999,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30019] [[56380,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30019] [[56380,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30108] [[56547,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30108] [[56547,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30246] [[57177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30246] [[57177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30305] [[57118,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30305] [[57118,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30528] [[56895,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30528] [[56895,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30580] [[56843,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30580] [[56843,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30641] [[57038,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30641] [[57038,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30672] [[57007,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:30672] [[57007,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30770] [[53581,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30770] [[53581,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30790] [[53561,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30790] [[53561,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30918] [[53689,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30918] [[53689,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:30981] [[53370,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:30981] [[53370,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:31041] [[53310,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31041] [[53310,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31067] [[53284,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31067] [[53284,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31094] [[53257,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31094] [[53257,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31126] [[53481,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31126] [[53481,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31316] [[54059,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:31316] [[54059,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:31343] [[54032,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31343] [[54032,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31371] [[54260,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31371] [[54260,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31415] [[54216,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:31415] [[54216,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31486] [[54145,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31486] [[54145,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31520] [[53855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:31520] [[53855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31622] [[54009,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31622] [[54009,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31692] [[53939,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31692] [[53939,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31891] [[54764,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31891] [[54764,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31927] [[54728,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:31927] [[54728,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:32097] [[54302,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:32097] [[54302,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:32465] [[55214,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:32465] [[55214,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:32657] [[55022,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:32657] [[55022,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:00696] [[43975,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:00740] [[43931,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:00740] [[43931,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:00845] [[43570,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:00845] [[43570,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01022] [[43649,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:01022] [[43649,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01268] [[44427,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:01268] [[44427,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01354] [[44085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:01354] [[44085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01702] [[45017,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:01702] [[45017,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:01730] [[44989,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:01730] [[44989,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01914] [[44549,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:01914] [[44549,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02164] [[41227,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02164] [[41227,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02182] [[41465,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:02182] [[41465,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02300] [[41347,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:02300] [[41347,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02434] [[41213,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02434] [[41213,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02730] [[41941,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02730] [[41941,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02845] [[41570,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02845] [[41570,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02856] [[41559,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02856] [[41559,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02895] [[41520,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:02895] [[41520,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03112] [[42327,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:03112] [[42327,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03227] [[42468,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:03227] [[42468,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03507] [[42188,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:03507] [[42188,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:03550] [[42145,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:03550] [[42145,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03682] [[42781,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:03682] [[42781,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03809] [[42910,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:03809] [[42910,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03903] [[42560,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:03903] [[42560,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04116] [[47467,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:04116] [[47467,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04551] [[47288,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:04551] [[47288,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04867] [[47740,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:04867] [[47740,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05081] [[47782,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:05081] [[47782,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05200] [[48431,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05200] [[48431,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05342] [[48545,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:05342] [[48545,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05738] [[48917,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05738] [[48917,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05816] [[49095,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05816] [[49095,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06350] [[45489,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:06350] [[45489,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06528] [[45311,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:06528] [[45311,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06596] [[45243,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:06596] [[45243,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:06623] [[45216,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:06623] [[45216,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06741] [[45866,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:06741] [[45866,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07000] [[45607,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07000] [[45607,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07052] [[45811,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07052] [[45811,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07124] [[45739,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:07124] [[45739,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07375] [[46512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07375] [[46512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07459] [[46172,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:07459] [[46172,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07698] [[46957,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07698] [[46957,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07799] [[46856,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:07799] [[46856,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:07818] [[47093,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07818] [[47093,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07853] [[47058,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:07853] [[47058,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07980] [[46675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07980] [[46675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08398] [[35249,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08398] [[35249,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08426] [[35221,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:08426] [[35221,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08688] [[34959,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08688] [[34959,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08725] [[35690,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08725] [[35690,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08766] [[35649,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08766] [[35649,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08796] [[35619,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:08796] [[35619,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08977] [[35438,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08977] [[35438,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09382] [[36313,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09382] [[36313,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09594] [[35845,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09594] [[35845,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09691] [[36004,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:09691] [[36004,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09788] [[36675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09788] [[36675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09906] [[36813,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:09906] [[36813,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10128] [[36591,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10128] [[36591,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10471] [[33176,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:10471] [[33176,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10536] [[32855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:10536] [[32855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10777] [[33638,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:10777] [[33638,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10902] [[33769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10902] [[33769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10938] [[33733,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10938] [[33733,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11044] [[33371,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11044] [[33371,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11371] [[34068,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11371] [[34068,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11406] [[34289,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:11406] [[34289,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11640] [[33799,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:11640] [[33799,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11754] [[33941,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:11754] [[33941,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11908] [[34811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11908] [[34811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11934] [[34785,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11934] [[34785,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12005] [[34714,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12005] [[34714,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12045] [[34418,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12045] [[34418,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12186] [[34533,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12186] [[34533,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12429] [[39410,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12429] [[39410,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12471] [[39368,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:12471] [[39368,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:12505] [[39334,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12505] [[39334,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12640] [[38943,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12640] [[38943,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13051] [[39812,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13051] [[39812,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13320] [[40311,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13320] [[40311,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13343] [[40288,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13343] [[40288,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13395] [[40236,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13395] [[40236,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13460] [[40427,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13460] [[40427,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13576] [[40055,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13576] [[40055,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13610] [[40021,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13610] [[40021,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13763] [[40124,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13763] [[40124,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13903] [[40752,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:13903] [[40752,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13972] [[40939,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13972] [[40939,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:15191] [[37416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:15191] [[37416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16223] [[38432,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16223] [[38432,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16673] [[59486,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:16673] [[59486,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:17135] [[60304,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:17135] [[60304,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18282] [[60949,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18282] [[60949,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18603] [[57812,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18603] [[57812,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18787] [[57372,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18787] [[57372,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18989] [[58194,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18989] [[58194,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19706] [[58757,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19706] [[58757,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19774] [[58433,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19774] [[58433,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20191] [[59296,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20191] [[59296,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21726] [[64929,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21726] [[64929,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22202] [[65477,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:22202] [[65477,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22755] [[61852,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22755] [[61852,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22822] [[61529,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22822] [[61529,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22848] [[61503,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:22848] [[61503,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23165] [[62210,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23165] [[62210,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23208] [[62423,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:23208] [[62423,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23598] [[62801,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:23598] [[62801,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23685] [[62970,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23685] [[62970,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23982] [[62673,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:23982] [[62673,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24209] [[63470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:24209] [[63470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24395] [[63028,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:24395] [[63028,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24543] [[63136,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:24543] [[63136,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24685] [[51474,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:24685] [[51474,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24840] [[51319,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:24840] [[51319,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:24967] [[51448,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:24967] [[51448,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:25335] [[52104,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:25335] [[52104,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:25837] [[52626,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:25837] [[52626,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26237] [[52994,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:26237] [[52994,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:26848] [[49567,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:26848] [[49567,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:27773] [[50434,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:27773] [[50434,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:28449] [[50782,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:28449] [[50782,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29515] [[55860,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:29515] [[55860,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:29909] [[56746,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:29909] [[56746,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-35.local:30389] [[57290,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:31711] [[53920,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:31711] [[53920,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-35.local:32719] [[54960,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:00674] [[43997,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:00674] [[43997,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:01830] [[44633,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:01830] [[44633,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:02973] [[41698,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:02973] [[41698,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:03720] [[42999,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:03720] [[42999,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04352] [[47231,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:04352] [[47231,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04494] [[47345,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:04494] [[47345,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:04966] [[47641,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:04966] [[47641,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05278] [[48609,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05278] [[48609,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:05660] [[48995,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05660] [[48995,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05713] [[48942,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:05713] [[48942,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06161] [[45422,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:06161] [[45422,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06668] [[45939,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:06668] [[45939,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:06984] [[45623,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:06984] [[45623,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07273] [[46358,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07273] [[46358,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:07987] [[46668,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:07987] [[46668,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08092] [[46819,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08092] [[46819,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:08321] [[35326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:08321] [[35326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09136] [[35535,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09136] [[35535,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09421] [[36274,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09421] [[36274,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:09625] [[36070,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09625] [[36070,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:09705] [[35990,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:09705] [[35990,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10283] [[33108,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:10283] [[33108,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:10556] [[32835,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10556] [[32835,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:10622] [[32769,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:10622] [[32769,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11188] [[33483,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11188] [[33483,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:11347] [[34092,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:11347] [[34092,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12502] [[39337,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12502] [[39337,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12718] [[39121,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:12718] [[39121,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:12881] [[39726,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:12881] [[39726,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13150] [[39457,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13150] [[39457,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13423] [[40208,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13423] [[40208,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:13619] [[40012,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:13619] [[40012,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:14039] [[40872,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:14039] [[40872,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:14792] [[37047,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:14926] [[37681,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:14926] [[37681,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:15491] [[38396,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:15491] [[38396,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:15683] [[37948,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:15683] [[37948,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:15737] [[37894,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:15737] [[37894,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16041] [[38870,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16041] [[38870,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:16416] [[59743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:16416] [[59743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:17866] [[60597,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:17866] [[60597,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18063] [[61424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18063] [[61424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18435] [[57724,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18479] [[57680,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18479] [[57680,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18586] [[57829,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:18586] [[57829,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18773] [[57386,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:18773] [[57386,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18833] [[57582,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:18833] [[57582,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:18984] [[58199,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:18984] [[58199,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19209] [[57974,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19209] [[57974,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19273] [[57910,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:19273] [[57910,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:19296] [[57887,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19296] [[57887,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:19551] [[58656,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:19551] [[58656,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-35.local:20096] [[59391,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20263] [[58968,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20263] [[58968,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20436] [[59051,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20436] [[59051,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20484] [[63867,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:20484] [[63867,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20629] [[63978,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:20629] [[63978,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:20949] [[63658,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:20949] [[63658,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21033] [[64342,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21033] [[64342,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21304] [[64071,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21304] [[64071,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21447] [[64184,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21447] [[64184,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21554] [[64845,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:21554] [[64845,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:21926] [[64729,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:21926] [[64729,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22312] [[65111,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-35.local:22312] [[65111,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22674] [[61933,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22674] [[61933,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:22794] [[61557,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:22794] [[61557,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-35.local:23274] [[62357,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-35.local:23274] [[62357,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-35 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-35 Local device: qib0 -------------------------------------------------------------------------- {"realtime":7018.87,"usertime":5921.69,"systime":131.73,"memmax":44448,"memavg":0}