-------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23188] [[42535,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23188] [[42535,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23241] [[42618,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23241] [[42618,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23819] [[41400,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23819] [[41400,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24079] [[41660,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24079] [[41660,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25245] [[40494,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25245] [[40494,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26080] [[39251,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26080] [[39251,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26161] [[39554,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26161] [[39554,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26233] [[39626,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26233] [[39626,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26683] [[38024,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26683] [[38024,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26765] [[37950,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26765] [[37950,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26850] [[37969,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26850] [[37969,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27039] [[38188,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27039] [[38188,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27246] [[38621,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27246] [[38621,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27640] [[38731,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27640] [[38731,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27875] [[36944,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27875] [[36944,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27969] [[37362,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27969] [[37362,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-32.local:28082] [[37121,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29340] [[36399,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29340] [[36399,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29629] [[36622,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29629] [[36622,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29786] [[35049,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29786] [[35049,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:30891] [[33816,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30891] [[33816,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31347] [[34496,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31347] [[34496,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31632] [[34595,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31632] [[34595,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32176] [[33027,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32176] [[33027,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32632] [[33739,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32632] [[33739,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00329] [[65018,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:00329] [[65018,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01424] [[63779,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01424] [[63779,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01702] [[64021,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01702] [[64021,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01822] [[64429,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01822] [[64429,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:03161] [[61674,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:03161] [[61674,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:04769] [[60946,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:04769] [[60946,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05859] [[59984,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05859] [[59984,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:06158] [[58557,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06158] [[58557,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:07162] [[59209,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07162] [[59209,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:07609] [[57610,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07609] [[57610,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:08580] [[56631,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:08580] [[56631,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09357] [[55358,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:09357] [[55358,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09575] [[55764,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09575] [[55764,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09768] [[55963,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09768] [[55963,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:10231] [[56132,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:10231] [[56132,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:10762] [[54969,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:10762] [[54969,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:14149] [[52214,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:14149] [[52214,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:14250] [[51993,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:14250] [[51993,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:14661] [[50678,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:14661] [[50678,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:15370] [[49337,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:15370] [[49337,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:16255] [[50124,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16255] [[50124,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17201] [[49026,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:17201] [[49026,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18095] [[47644,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18095] [[47644,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18176] [[48051,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18176] [[48051,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18281] [[48090,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18281] [[48090,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18533] [[46294,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:18533] [[46294,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18772] [[46567,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18772] [[46567,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19109] [[46614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19109] [[46614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19336] [[46907,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19336] [[46907,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19741] [[45486,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19741] [[45486,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19855] [[45372,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:19855] [[45372,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20771] [[44432,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:20771] [[44432,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:21758] [[43085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:21758] [[43085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22559] [[42156,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:22559] [[42156,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23464] [[42779,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23464] [[42779,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23888] [[41443,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23888] [[41443,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24445] [[41934,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24445] [[41934,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24704] [[39987,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24704] [[39987,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24820] [[40007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24820] [[40007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24905] [[40442,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24905] [[40442,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24977] [[40226,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24977] [[40226,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25255] [[40468,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25255] [[40468,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25323] [[40536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25323] [[40536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25472] [[40755,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:25472] [[40755,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25833] [[39002,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:25833] [[39002,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26405] [[39830,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26405] [[39830,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26524] [[39727,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26524] [[39727,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26593] [[39762,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26593] [[39762,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26704] [[38115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26704] [[38115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27772] [[37071,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27879] [[36948,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27879] [[36948,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28235] [[37624,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28235] [[37624,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28333] [[37406,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:28333] [[37406,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29263] [[36604,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29263] [[36604,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29525] [[36838,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29525] [[36838,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29917] [[34926,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29917] [[34926,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31377] [[34338,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31377] [[34338,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31455] [[34412,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31455] [[34412,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31601] [[34754,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31601] [[34754,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31956] [[32871,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31956] [[32871,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32037] [[33174,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32037] [[33174,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-32.local:32122] [[33225,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32225] [[33106,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32225] [[33106,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32318] [[33421,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32318] [[33421,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32482] [[33361,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32482] [[33361,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32621] [[33758,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32621] [[33758,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00754] [[65089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00754] [[65089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00824] [[65419,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00824] [[65419,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00973] [[65406,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00973] [[65406,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01067] [[63640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01067] [[63640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01283] [[63920,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01283] [[63920,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01493] [[63846,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01493] [[63846,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01585] [[64130,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01585] [[64130,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01747] [[64096,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01747] [[64096,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:02909] [[63470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:02909] [[63470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:03334] [[61877,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:03334] [[61877,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:03582] [[61773,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:03582] [[61773,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:03861] [[62374,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:03861] [[62374,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:04475] [[60872,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:04475] [[60872,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05411] [[59792,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05411] [[59792,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05688] [[60043,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:05688] [[60043,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:05812] [[59911,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:05812] [[59911,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:06246] [[58581,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:06246] [[58581,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:06882] [[58961,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06882] [[58961,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06995] [[59360,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06995] [[59360,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:07784] [[58075,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07784] [[58075,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:07956] [[58279,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07956] [[58279,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:08264] [[56571,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:08264] [[56571,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:08754] [[56961,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:08754] [[56961,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09220] [[55479,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09220] [[55479,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09304] [[55531,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:09304] [[55531,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09571] [[55760,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09571] [[55760,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09956] [[55895,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:09956] [[55895,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:10393] [[54314,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:10393] [[54314,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:10647] [[54564,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:12349] [[52366,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:12349] [[52366,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:12687] [[52540,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:12687] [[52540,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13066] [[53177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13156] [[53207,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:13156] [[53207,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13332] [[51367,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:13332] [[51367,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13881] [[51850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:13881] [[51850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:14289] [[52066,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:14289] [[52066,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:14386] [[50305,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:14386] [[50305,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:14631] [[50580,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:14631] [[50580,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:15289] [[50954,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:15289] [[50954,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:16398] [[48317,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16398] [[48317,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17379] [[48976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:17379] [[48976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18008] [[47851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18008] [[47851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18410] [[47961,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:18410] [[47961,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18667] [[46168,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18667] [[46168,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18946] [[46769,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18946] [[46769,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19052] [[46815,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:19052] [[46815,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19658] [[45177,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19658] [[45177,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19710] [[45133,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:19710] [[45133,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20338] [[46017,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:20338] [[46017,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20909] [[44318,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:20909] [[44318,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:21757] [[43086,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:21757] [[43086,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22057] [[43674,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:22057] [[43674,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22251] [[43608,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:22251] [[43608,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:22311] [[43924,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:22311] [[43924,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:22378] [[43993,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:22378] [[43993,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22908] [[42447,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:22908] [[42447,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23170] [[42545,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23170] [[42545,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23203] [[42512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23203] [[42512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23543] [[42820,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23543] [[42820,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23898] [[41449,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23898] [[41449,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24125] [[41614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24125] [[41614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24290] [[41553,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24290] [[41553,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24571] [[41800,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24571] [[41800,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24635] [[40072,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24635] [[40072,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25394] [[40833,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:25394] [[40833,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25987] [[39216,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25987] [[39216,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26540] [[39711,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26540] [[39711,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26606] [[39773,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26606] [[39773,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27192] [[38539,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27192] [[38539,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27382] [[38469,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27382] [[38469,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27533] [[38718,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27533] [[38718,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27922] [[37281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27922] [[37281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28031] [[37324,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:28031] [[37324,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28280] [[37579,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28280] [[37579,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28331] [[37400,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28331] [[37400,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28732] [[35983,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28732] [[35983,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28992] [[36339,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28992] [[36339,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29090] [[36113,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29090] [[36113,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29284] [[36567,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29284] [[36567,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29875] [[34816,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29875] [[34816,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29936] [[34883,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29936] [[34883,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30039] [[35300,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30039] [[35300,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:30382] [[35357,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30382] [[35357,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31199] [[34156,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31199] [[34156,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31250] [[34465,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31250] [[34465,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31400] [[34331,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31400] [[34331,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31682] [[34673,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31682] [[34673,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32046] [[33181,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32046] [[33181,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32183] [[33028,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32183] [[33028,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32463] [[33404,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:32463] [[33404,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:32730] [[33641,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32730] [[33641,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00482] [[64849,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00482] [[64849,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00732] [[65135,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00732] [[65135,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00919] [[65316,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01010] [[65345,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01010] [[65345,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01119] [[63724,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01119] [[63724,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01779] [[64064,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01779] [[64064,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:02349] [[62878,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:02349] [[62878,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:02833] [[63394,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:02833] [[63394,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:03485] [[61742,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:03485] [[61742,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05339] [[59496,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:05339] [[59496,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05505] [[59698,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05505] [[59698,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05940] [[60295,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05940] [[60295,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:06065] [[60162,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06065] [[60162,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06180] [[58519,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:06180] [[58519,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:07626] [[57721,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07626] [[57721,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:08082] [[58145,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:08082] [[58145,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:08157] [[58222,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:08157] [[58222,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:08583] [[56628,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:08583] [[56628,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09050] [[57321,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09050] [[57321,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09957] [[55894,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09957] [[55894,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:10066] [[56289,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:11382] [[53445,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:11382] [[53445,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:12017] [[53826,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:12017] [[53826,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:12957] [[52782,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13582] [[51645,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:13582] [[51645,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13815] [[51524,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:13815] [[51524,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:14997] [[50726,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:14997] [[50726,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:15739] [[49608,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:15739] [[49608,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:16361] [[50010,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:16361] [[50010,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:16493] [[48350,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16493] [[48350,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16578] [[48241,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16578] [[48241,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16670] [[48557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16670] [[48557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17623] [[47204,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:17623] [[47204,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17968] [[47747,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:17968] [[47747,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19133] [[46606,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:19133] [[46606,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19919] [[45436,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20600] [[44235,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:20600] [[44235,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20741] [[44470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:20741] [[44470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:21641] [[43066,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:21641] [[43066,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-32.local:22117] [[43734,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22300] [[43951,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:22300] [[43951,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22533] [[42166,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:22533] [[42166,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23797] [[41030,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23797] [[41030,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-32.local:24074] [[41657,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24524] [[41855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:24524] [[41855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25397] [[40838,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25397] [[40838,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25464] [[40907,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:25464] [[40907,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:25538] [[40817,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:25538] [[40817,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:25777] [[38914,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:25777] [[38914,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26098] [[39233,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26098] [[39233,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26285] [[39454,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26285] [[39454,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26521] [[39722,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26521] [[39722,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26974] [[38381,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26974] [[38381,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27353] [[38506,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27353] [[38506,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27833] [[36874,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27833] [[36874,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27980] [[37375,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:27980] [[37375,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28536] [[37835,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28536] [[37835,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29453] [[36798,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29453] [[36798,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29526] [[36837,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29526] [[36837,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:30130] [[35073,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30130] [[35073,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:30324] [[35527,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30324] [[35527,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30390] [[35333,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:30390] [[35333,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31075] [[34256,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31075] [[34256,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31542] [[34693,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31542] [[34693,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31670] [[34565,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31670] [[34565,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:31747] [[32944,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31747] [[32944,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31976] [[32859,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31976] [[32859,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32042] [[33177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:32042] [[33177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01164] [[63551,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01164] [[63551,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01920] [[64307,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01920] [[64307,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:02114] [[62705,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:02114] [[62705,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:02881] [[63474,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:02881] [[63474,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:03778] [[62065,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:03778] [[62065,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:04927] [[61324,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:04927] [[61324,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:05526] [[59685,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05526] [[59685,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05657] [[60074,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:05657] [[60074,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:07814] [[57909,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07814] [[57909,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07942] [[58293,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:07942] [[58293,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09011] [[57216,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:09011] [[57216,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:09179] [[57192,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:09179] [[57192,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:10135] [[56100,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:10135] [[56100,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13099] [[53144,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:13099] [[53144,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13433] [[51402,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:13433] [[51402,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:13687] [[51652,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:13687] [[51652,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:14296] [[52075,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:14296] [[52075,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:14397] [[50318,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:14397] [[50318,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:15097] [[50762,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:15097] [[50762,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:15630] [[49597,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:15630] [[49597,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:16068] [[49783,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:16068] [[49783,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17516] [[47327,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:17516] [[47327,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17716] [[47495,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:17985] [[47858,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:17985] [[47858,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:18140] [[47727,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:18140] [[47727,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:18217] [[48026,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18217] [[48026,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:18252] [[48127,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:18252] [[48127,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:19491] [[45200,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:19491] [[45200,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20076] [[45791,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:20076] [[45791,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:20332] [[46047,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:20332] [[46047,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:21396] [[44839,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:21396] [[44839,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:21728] [[43091,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:21728] [[43091,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:22939] [[42280,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:22939] [[42280,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23177] [[42554,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23177] [[42554,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23249] [[42594,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23249] [[42594,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23474] [[42753,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23474] [[42753,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23615] [[41100,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23615] [[41100,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23675] [[41160,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:23675] [[41160,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:23906] [[41425,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:23906] [[41425,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24088] [[41643,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24088] [[41643,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:24715] [[39992,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24715] [[39992,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24768] [[40051,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24768] [[40051,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24839] [[40372,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:24839] [[40372,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26171] [[39560,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26171] [[39560,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26243] [[39472,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26243] [[39472,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26309] [[39542,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:26309] [[39542,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:26922] [[38297,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:26922] [[38297,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27349] [[38502,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27349] [[38502,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27519] [[38860,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27519] [[38860,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:27644] [[38735,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:27644] [[38735,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:28142] [[37213,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28142] [[37213,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28215] [[37508,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:28215] [[37508,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29174] [[36165,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29174] [[36165,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29527] [[36836,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29527] [[36836,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29785] [[35050,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:29785] [[35050,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:29963] [[35256,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:29963] [[35256,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31043] [[34288,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31043] [[34288,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:31708] [[34671,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:31708] [[34671,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00356] [[64983,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00356] [[64983,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00449] [[64882,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:00449] [[64882,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:00480] [[64851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:00480] [[64851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:00954] [[65289,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:00954] [[65289,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01606] [[64245,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01606] [[64245,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-32.local:01624] [[64235,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01624] [[64235,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-32.local:01677] [[64062,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-32.local:01677] [[64062,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-32 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-32 Local device: qib0 -------------------------------------------------------------------------- {"realtime":6945.39,"usertime":5721.17,"systime":209.35,"memmax":66204,"memavg":0}