-------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24216] [[39104,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24216] [[39104,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24785] [[42633,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24785] [[42633,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25301] [[42125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25301] [[42125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27252] [[44076,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27252] [[44076,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27652] [[43612,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27652] [[43612,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27977] [[43793,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28276] [[43052,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28276] [[43052,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28447] [[43335,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28447] [[43335,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29276] [[46084,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29276] [[46084,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29584] [[46536,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29584] [[46536,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30908] [[48868,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30908] [[48868,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01369] [[49921,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01369] [[49921,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01504] [[50104,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01504] [[50104,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04410] [[55138,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04410] [[55138,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06284] [[57044,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06284] [[57044,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06634] [[57266,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06634] [[57266,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07848] [[55536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07848] [[55536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08259] [[58907,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08259] [[58907,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09455] [[58039,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09455] [[58039,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09671] [[58271,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09671] [[58271,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10933] [[60653,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10933] [[60653,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11280] [[59976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11280] [[59976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12770] [[63418,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12770] [[63418,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15098] [[64674,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15098] [[64674,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15873] [[63577,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15873] [[63577,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16390] [[34398,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16390] [[34398,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17967] [[32887,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17967] [[32887,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18493] [[36453,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18493] [[36453,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18998] [[35950,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18998] [[35950,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19849] [[35793,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19849] [[35793,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20796] [[38756,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20796] [[38756,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22595] [[40475,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22595] [[40475,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22986] [[40850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22986] [[40850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:23407] [[40247,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25097] [[42065,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25097] [[42065,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25985] [[41945,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25985] [[41945,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26106] [[41890,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26106] [[41890,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26500] [[41436,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26500] [[41436,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27287] [[44239,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27287] [[44239,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27680] [[43640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27680] [[43640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29231] [[46199,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29231] [[46199,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29350] [[46334,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29350] [[46334,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29524] [[46348,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30226] [[45130,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30226] [[45130,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31943] [[47775,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31943] [[47775,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32008] [[47952,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32008] [[47952,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01166] [[49878,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01166] [[49878,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01365] [[49933,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01365] [[49933,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01477] [[50077,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01477] [[50077,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03568] [[52136,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03568] [[52136,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08678] [[59326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08678] [[59326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08819] [[58411,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08819] [[58411,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09701] [[58301,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09701] [[58301,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10037] [[57709,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10037] [[57709,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12104] [[59664,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12104] [[59664,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13058] [[62810,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13058] [[62810,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13875] [[61547,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13875] [[61547,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14064] [[61608,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14064] [[61608,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16274] [[63946,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16274] [[63946,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17431] [[33359,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17619] [[33419,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17619] [[33419,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19264] [[36120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19264] [[36120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20890] [[38850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20890] [[38850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24284] [[39044,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24284] [[39044,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24956] [[42788,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24956] [[42788,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25303] [[42127,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25303] [[42127,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26524] [[41412,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26524] [[41412,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27136] [[44120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27136] [[44120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27290] [[44226,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27290] [[44226,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28167] [[43103,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28167] [[43103,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29953] [[45913,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29953] [[45913,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31150] [[49142,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02183] [[52959,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02183] [[52959,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03647] [[51303,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03647] [[51303,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04420] [[55068,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04420] [[55068,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05661] [[53317,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05661] [[53317,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06625] [[57273,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06625] [[57273,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07167] [[56743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07167] [[56743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07294] [[55846,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07294] [[55846,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07490] [[56090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07490] [[56090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08654] [[59286,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08654] [[59286,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09490] [[58186,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09490] [[58186,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09895] [[57599,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09895] [[57599,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10554] [[61282,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10554] [[61282,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12369] [[62985,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12369] [[62985,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14565] [[65213,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14565] [[65213,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15360] [[64088,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15360] [[64088,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15675] [[64355,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15675] [[64355,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16222] [[63750,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16222] [[63750,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19194] [[36002,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19194] [[36002,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19716] [[35676,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19716] [[35676,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21166] [[38134,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21166] [[38134,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22824] [[40816,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22824] [[40816,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23606] [[39534,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23606] [[39534,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23862] [[39790,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23862] [[39790,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24027] [[39811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24027] [[39811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24229] [[39165,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24229] [[39165,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24497] [[39401,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24497] [[39401,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25084] [[42916,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25084] [[42916,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25369] [[42305,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25369] [[42305,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26736] [[44584,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26736] [[44584,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28106] [[43922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28106] [[43922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28248] [[43008,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28248] [[43008,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31617] [[48601,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31617] [[48601,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32254] [[48038,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32254] [[48038,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00467] [[51083,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00467] [[51083,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00713] [[50321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00713] [[50321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00901] [[50653,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00901] [[50653,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01690] [[49346,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02740] [[52460,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02740] [[52460,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02962] [[52682,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02962] [[52682,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03238] [[51966,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03238] [[51966,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03574] [[52142,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03574] [[52142,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03749] [[51453,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03749] [[51453,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04244] [[54988,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04679] [[54303,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04679] [[54303,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05056] [[54680,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05056] [[54680,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06135] [[53679,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06135] [[53679,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07143] [[56767,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07143] [[56767,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07338] [[56050,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07338] [[56050,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08015] [[55575,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08015] [[55575,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08227] [[59003,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08227] [[59003,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08597] [[59341,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08597] [[59341,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08982] [[58702,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08982] [[58702,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09154] [[58778,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09154] [[58778,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11791] [[59479,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11791] [[59479,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13630] [[62310,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13630] [[62310,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14826] [[65458,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14826] [[65458,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16541] [[34501,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16541] [[34501,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18967] [[35919,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18967] [[35919,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19082] [[36050,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19082] [[36050,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19848] [[35792,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19848] [[35792,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20688] [[38536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20688] [[38536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20934] [[38814,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20934] [[38814,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21225] [[38065,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21225] [[38065,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22078] [[36966,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22078] [[36966,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22558] [[40518,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22558] [[40518,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23707] [[39619,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23707] [[39619,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23846] [[39806,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23846] [[39806,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25294] [[42134,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25294] [[42134,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25501] [[42437,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25501] [[42437,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26714] [[44546,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26714] [[44546,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28623] [[43415,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28623] [[43415,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29287] [[46143,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29287] [[46143,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30373] [[45309,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30373] [[45309,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30512] [[45416,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30512] [[45416,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32426] [[47346,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32426] [[47346,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32551] [[47487,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32551] [[47487,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00674] [[50426,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00674] [[50426,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02220] [[52980,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02220] [[52980,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04953] [[54529,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04953] [[54529,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06141] [[53669,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06141] [[53669,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07873] [[55449,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07873] [[55449,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08134] [[55710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08134] [[55710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08622] [[59382,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08622] [[59382,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08849] [[58569,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08849] [[58569,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09241] [[57921,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09241] [[57921,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10408] [[61168,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10408] [[61168,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12543] [[63143,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12543] [[63143,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14031] [[61591,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14031] [[61591,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14709] [[65325,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14709] [[65325,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15087] [[64695,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15087] [[64695,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15173] [[64797,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15173] [[64797,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17268] [[34092,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17268] [[34092,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19290] [[36098,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19290] [[36098,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21114] [[37922,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21114] [[37922,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22232] [[36992,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22232] [[36992,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22727] [[40607,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22727] [[40607,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22872] [[40704,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22872] [[40704,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23388] [[40196,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23388] [[40196,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:24464] [[39368,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24596] [[42572,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24596] [[42572,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24690] [[42538,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25190] [[42046,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25190] [[42046,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25307] [[42115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25307] [[42115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25504] [[42488,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25504] [[42488,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25750] [[41678,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25750] [[41678,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26295] [[41199,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26878] [[44710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26878] [[44710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27592] [[44432,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27592] [[44432,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28206] [[43126,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29032] [[46896,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29032] [[46896,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29934] [[45750,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29934] [[45750,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30126] [[46070,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30126] [[46070,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31279] [[48247,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31279] [[48247,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31518] [[48454,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31518] [[48454,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31669] [[48621,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31669] [[48621,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31767] [[47695,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31767] [[47695,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32256] [[47192,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32256] [[47192,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:01062] [[49790,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01824] [[49528,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01824] [[49528,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02501] [[53149,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02501] [[53149,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03185] [[51753,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03185] [[51753,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03862] [[51534,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03862] [[51534,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04971] [[54579,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04971] [[54579,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06134] [[53678,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06134] [[53678,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06464] [[57112,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06464] [[57112,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07654] [[56254,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07654] [[56254,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10008] [[57664,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10008] [[57664,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11899] [[59427,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11899] [[59427,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12135] [[59711,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12135] [[59711,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12291] [[63067,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12291] [[63067,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12414] [[63014,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12414] [[63014,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12760] [[63360,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12760] [[63360,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12965] [[62717,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12965] [[62717,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:13502] [[62182,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14800] [[65416,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14800] [[65416,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15089] [[64681,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15089] [[64681,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15334] [[64958,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15334] [[64958,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15475] [[64043,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15717] [[64317,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15717] [[64317,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15962] [[63490,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15962] [[63490,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16619] [[34483,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16619] [[34483,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16810] [[34802,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16810] [[34802,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17536] [[33496,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17536] [[33496,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17991] [[32799,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17991] [[32799,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18228] [[33132,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18228] [[33132,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18676] [[36524,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18676] [[36524,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18919] [[36799,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18919] [[36799,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19485] [[35397,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19485] [[35397,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19914] [[35730,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19914] [[35730,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20978] [[38826,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20978] [[38826,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23318] [[40270,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23318] [[40270,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23589] [[39549,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23589] [[39549,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24071] [[39007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24071] [[39007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24532] [[39308,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24532] [[39308,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25511] [[42495,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25511] [[42495,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27016] [[45008,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27016] [[45008,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28000] [[43832,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28000] [[43832,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28748] [[46612,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28748] [[46612,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29015] [[46863,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29015] [[46863,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30500] [[45436,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30500] [[45436,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31117] [[49109,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31117] [[49109,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31302] [[48158,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31302] [[48158,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31845] [[47677,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31845] [[47677,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32053] [[47981,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32053] [[47981,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:32246] [[48046,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00496] [[51112,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00496] [[51112,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00790] [[50510,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00790] [[50510,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00890] [[50466,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00890] [[50466,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01609] [[49169,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01609] [[49169,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02026] [[49586,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02026] [[49586,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04091] [[51619,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04091] [[51619,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05433] [[54113,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05433] [[54113,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06789] [[56541,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06789] [[56541,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07315] [[56011,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07315] [[56011,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07723] [[55411,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07723] [[55411,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08133] [[55709,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08133] [[55709,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08735] [[58439,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08735] [[58439,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:09250] [[57978,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11325] [[60005,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11325] [[60005,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11467] [[60051,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11467] [[60051,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12003] [[59579,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12003] [[59579,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12183] [[59855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12183] [[59855,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12925] [[62501,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12925] [[62501,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13947] [[61475,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13947] [[61475,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14510] [[65270,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14510] [[65270,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17039] [[34007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17039] [[34007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17213] [[34149,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17213] [[34149,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18526] [[36358,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18526] [[36358,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19254] [[36206,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19254] [[36206,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19926] [[35726,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19926] [[35726,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20114] [[35018,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20114] [[35018,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21145] [[38081,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21145] [[38081,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22664] [[40656,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22664] [[40656,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23121] [[39945,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23121] [[39945,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23349] [[40301,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23349] [[40301,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24076] [[38996,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24076] [[38996,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26197] [[40973,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26197] [[40973,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26405] [[41341,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26405] [[41341,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26482] [[41258,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26482] [[41258,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26823] [[44703,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26823] [[44703,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27551] [[44487,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27551] [[44487,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28351] [[43239,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28351] [[43239,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28772] [[46652,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28772] [[46652,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29055] [[46887,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29055] [[46887,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29182] [[47014,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29182] [[47014,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29689] [[46497,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29689] [[46497,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30397] [[45285,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30397] [[45285,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31052] [[48916,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31052] [[48916,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32036] [[47996,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32036] [[47996,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32098] [[47930,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32098] [[47930,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32470] [[47246,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32470] [[47246,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00349] [[50949,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00349] [[50949,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00793] [[50497,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00793] [[50497,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00932] [[50684,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00932] [[50684,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01185] [[49913,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01185] [[49913,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01748] [[49292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01748] [[49292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01815] [[49487,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01815] [[49487,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02301] [[52901,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02301] [[52901,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02358] [[53102,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02358] [[53102,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02903] [[52495,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02903] [[52495,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03897] [[51553,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03897] [[51553,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04330] [[54962,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04330] [[54962,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04857] [[54433,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04857] [[54433,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06376] [[57008,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06376] [[57008,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06730] [[56338,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06730] [[56338,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07035] [[56611,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07035] [[56611,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08072] [[55760,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08072] [[55760,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09449] [[58033,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09449] [[58033,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09654] [[58350,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09654] [[58350,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:10179] [[57755,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11065] [[60769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11065] [[60769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11257] [[60833,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11257] [[60833,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11391] [[59943,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11391] [[59943,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11868] [[59396,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11868] [[59396,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12214] [[59886,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12214] [[59886,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12329] [[63089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12329] [[63089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12833] [[62585,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12833] [[62585,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:13024] [[62648,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13286] [[62910,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13286] [[62910,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13713] [[62409,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13713] [[62409,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14515] [[65259,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14515] [[65259,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17266] [[34090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17266] [[34090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18660] [[36540,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18859] [[36851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18859] [[36851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20713] [[38577,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20713] [[38577,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21027] [[38011,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21027] [[38011,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21573] [[37405,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21573] [[37405,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22112] [[36920,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22112] [[36920,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22400] [[37336,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22400] [[37336,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22643] [[40491,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22643] [[40491,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23128] [[39936,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23128] [[39936,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23390] [[40198,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23390] [[40198,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24060] [[39844,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24060] [[39844,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24211] [[39115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24211] [[39115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24974] [[42966,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24974] [[42966,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25681] [[41481,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25681] [[41481,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26708] [[44556,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26708] [[44556,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28409] [[43169,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28409] [[43169,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28982] [[46958,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28982] [[46958,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29271] [[46095,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29271] [[46095,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29846] [[45774,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30010] [[45922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30010] [[45922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31800] [[47712,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31800] [[47712,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32445] [[47333,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32445] [[47333,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00581] [[50205,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00782] [[50518,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00782] [[50518,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01087] [[49767,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01087] [[49767,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01236] [[49804,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01236] [[49804,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01932] [[49620,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01932] [[49620,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02169] [[52769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02169] [[52769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02300] [[52900,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02300] [[52900,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02688] [[52440,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02688] [[52440,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03593] [[51281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03832] [[51360,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03832] [[51360,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04167] [[54815,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04167] [[54815,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04956] [[54532,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04956] [[54532,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05060] [[54684,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05060] [[54684,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05591] [[54159,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05591] [[54159,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06096] [[53640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06096] [[53640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07265] [[55865,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07265] [[55865,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07457] [[56185,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07457] [[56185,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07796] [[55340,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07796] [[55340,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11369] [[59953,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11369] [[59953,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11609] [[60161,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11609] [[60161,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12264] [[59824,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12264] [[59824,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12503] [[63119,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12503] [[63119,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13338] [[62018,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13338] [[62018,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13461] [[62157,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13461] [[62157,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13645] [[62229,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13645] [[62229,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15100] [[64676,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15100] [[64676,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15446] [[64014,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15446] [[64014,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15642] [[64322,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15642] [[64322,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16305] [[63977,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16305] [[63977,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17039] [[34007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17039] [[34007,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17116] [[33924,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17116] [[33924,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18032] [[32808,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18032] [[32808,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19443] [[36267,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19692] [[35508,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19692] [[35508,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20515] [[38523,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20515] [[38523,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22077] [[36965,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22077] [[36965,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22743] [[40591,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22743] [[40591,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24560] [[39336,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24560] [[39336,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26288] [[41192,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26288] [[41192,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27437] [[44405,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27437] [[44405,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28071] [[44031,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28071] [[44031,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28308] [[43212,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28308] [[43212,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28461] [[43381,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28461] [[43381,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28594] [[43498,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28594] [[43498,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29239] [[46191,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29618] [[46570,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29618] [[46570,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29887] [[45799,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29887] [[45799,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29994] [[45938,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29994] [[45938,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30323] [[45099,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30323] [[45099,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31306] [[48146,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31306] [[48146,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31853] [[47669,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31853] [[47669,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:32165] [[48125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01147] [[49699,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01147] [[49699,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01259] [[49843,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01259] [[49843,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02980] [[52732,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02980] [[52732,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03131] [[51811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03131] [[51811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03192] [[51744,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03192] [[51744,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03833] [[51361,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03833] [[51361,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04324] [[54972,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04374] [[55118,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04374] [[55118,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04815] [[54423,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04815] [[54423,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05356] [[53940,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05356] [[53940,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05489] [[54057,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05489] [[54057,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05774] [[53462,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05774] [[53462,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05859] [[53435,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05859] [[53435,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06063] [[53751,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06063] [[53751,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:08085] [[55757,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08653] [[59285,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08653] [[59285,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08777] [[58385,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08777] [[58385,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09504] [[58232,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09504] [[58232,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09585] [[58153,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09585] [[58153,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10751] [[61351,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10751] [[61351,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11242] [[60850,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11242] [[60850,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11500] [[60084,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11500] [[60084,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12502] [[63118,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12502] [[63118,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12798] [[63398,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12798] [[63398,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13205] [[62925,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13205] [[62925,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13283] [[62907,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13283] [[62907,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13908] [[61452,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13908] [[61452,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16272] [[63944,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16272] [[63944,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17078] [[34030,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17078] [[34030,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17361] [[34185,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17361] [[34185,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17413] [[33373,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17413] [[33373,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17506] [[33338,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17506] [[33338,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18123] [[32915,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18123] [[32915,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18439] [[36447,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18439] [[36447,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18555] [[36387,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18555] [[36387,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18832] [[36808,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18832] [[36808,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18978] [[35962,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18978] [[35962,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19018] [[35858,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19018] [[35858,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19848] [[35792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19848] [[35792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20852] [[38700,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20852] [[38700,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22056] [[36976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22056] [[36976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22679] [[40655,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22679] [[40655,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22784] [[40792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22784] [[40792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22897] [[40745,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22897] [[40745,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23434] [[40402,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23434] [[40402,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23563] [[39507,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23563] [[39507,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24328] [[39248,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24328] [[39248,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24750] [[42742,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24750] [[42742,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25296] [[42120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25296] [[42120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:25766] [[41726,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25890] [[41850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25890] [[41850,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26101] [[41901,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26101] [[41901,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:27053] [[45045,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27352] [[44160,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27352] [[44160,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27414] [[44366,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27414] [[44366,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28472] [[43360,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28472] [[43360,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28574] [[43462,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28574] [[43462,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:29813] [[45613,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30536] [[45328,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30536] [[45328,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30967] [[48815,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30967] [[48815,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31129] [[49089,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31129] [[49089,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31184] [[49032,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31184] [[49032,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:31289] [[48225,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31514] [[48450,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31514] [[48450,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31787] [[47731,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31787] [[47731,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32095] [[47879,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32095] [[47879,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32226] [[48058,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32226] [[48058,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32441] [[47329,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32653] [[47573,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32653] [[47573,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00325] [[50973,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00325] [[50973,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01571] [[49275,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01571] [[49275,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03011] [[52635,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03011] [[52635,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03712] [[51416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03712] [[51416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03781] [[51357,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03781] [[51357,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04577] [[55225,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04577] [[55225,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05884] [[53412,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05884] [[53412,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06608] [[57224,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06608] [[57224,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07146] [[56754,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07146] [[56754,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07714] [[55418,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07714] [[55418,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:07852] [[55540,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08371] [[59115,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08371] [[59115,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08481] [[59257,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08481] [[59257,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09000] [[58736,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09000] [[58736,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09455] [[58039,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09455] [[58039,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09882] [[57538,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09882] [[57538,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10037] [[57709,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10037] [[57709,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11205] [[60829,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11205] [[60829,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11328] [[59928,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11328] [[59928,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11646] [[60198,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11646] [[60198,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11793] [[59465,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11793] [[59465,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12161] [[59865,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12161] [[59865,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12919] [[62511,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12919] [[62511,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13426] [[61994,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13426] [[61994,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13638] [[62238,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13638] [[62238,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14259] [[61931,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14259] [[61931,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14361] [[65089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14361] [[65089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15687] [[64287,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15687] [[64287,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15899] [[63555,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15899] [[63555,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16148] [[63820,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16148] [[63820,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16286] [[63942,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16286] [[63942,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16363] [[63923,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16363] [[63923,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17476] [[33308,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17476] [[33308,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:18737] [[36713,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19327] [[36135,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19327] [[36135,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20302] [[35094,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20302] [[35094,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20578] [[38458,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20578] [[38458,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20652] [[38644,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20652] [[38644,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21215] [[38023,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21215] [[38023,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22335] [[37223,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22335] [[37223,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22726] [[40606,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22726] [[40606,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23461] [[40445,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23461] [[40445,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:24217] [[39105,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:24462] [[39382,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24608] [[42616,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24608] [[42616,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25038] [[42902,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25038] [[42902,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25423] [[42263,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25423] [[42263,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25592] [[42400,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25592] [[42400,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26914] [[44922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26914] [[44922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27262] [[44070,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27262] [[44070,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28166] [[43102,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28166] [[43102,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28316] [[43204,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28316] [[43204,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28506] [[43266,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28506] [[43266,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29019] [[46851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29019] [[46851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30433] [[45241,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30433] [[45241,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30807] [[48655,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30807] [[48655,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32130] [[48090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32130] [[48090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32484] [[47292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32484] [[47292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00845] [[50453,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00845] [[50453,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01931] [[49619,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01931] [[49619,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02103] [[52847,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02103] [[52847,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02695] [[52447,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02695] [[52447,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02824] [[52560,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02824] [[52560,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02916] [[52540,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02916] [[52540,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03037] [[52613,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03037] [[52613,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04736] [[54488,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04736] [[54488,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05176] [[53856,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05176] [[53856,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05495] [[54063,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05495] [[54063,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05809] [[53481,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05809] [[53481,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06088] [[53648,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06088] [[53648,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06575] [[57335,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06575] [[57335,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06927] [[56663,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06927] [[56663,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07226] [[55906,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07226] [[55906,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08360] [[59120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08360] [[59120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08461] [[59221,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08461] [[59221,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08584] [[59344,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08584] [[59344,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09544] [[58128,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09544] [[58128,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09658] [[58338,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09658] [[58338,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11077] [[60701,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11077] [[60701,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11403] [[60115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11403] [[60115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11672] [[60352,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11672] [[60352,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12267] [[59827,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12935] [[62687,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12935] [[62687,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13789] [[62341,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13789] [[62341,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14171] [[61699,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14171] [[61699,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14747] [[65475,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14747] [[65475,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15154] [[64874,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15154] [[64874,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15668] [[64364,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15668] [[64364,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16344] [[63872,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16344] [[63872,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17142] [[33966,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17142] [[33966,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17286] [[34270,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17286] [[34270,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17703] [[33663,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17703] [[33663,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17873] [[33673,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17873] [[33673,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18009] [[32769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18009] [[32769,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18262] [[33038,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18262] [[33038,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18372] [[33180,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18372] [[33180,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19316] [[36140,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19316] [[36140,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20075] [[34867,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20075] [[34867,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20793] [[38753,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21271] [[38223,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21271] [[38223,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21992] [[37808,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21992] [[37808,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22264] [[37024,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22264] [[37024,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23378] [[40202,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23378] [[40202,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23530] [[40370,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23530] [[40370,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23721] [[39665,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23721] [[39665,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23810] [[39770,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23810] [[39770,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25353] [[42321,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25353] [[42321,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25501] [[42437,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25501] [[42437,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26727] [[44607,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26727] [[44607,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27256] [[44064,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27256] [[44064,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27414] [[44366,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27414] [[44366,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28417] [[43353,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28417] [[43353,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:29223] [[46207,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29359] [[46327,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29359] [[46327,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29928] [[45744,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29928] [[45744,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30078] [[45862,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30078] [[45862,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30746] [[48706,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30746] [[48706,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31116] [[49108,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31116] [[49108,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32144] [[48072,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32144] [[48072,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32557] [[47477,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32557] [[47477,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01107] [[49675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01107] [[49675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01286] [[50014,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01286] [[50014,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01444] [[50172,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01444] [[50172,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01810] [[49482,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01810] [[49482,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02306] [[53082,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02306] [[53082,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02589] [[52293,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02589] [[52293,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02949] [[52701,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02949] [[52701,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03303] [[51903,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03303] [[51903,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03417] [[51969,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03417] [[51969,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04823] [[54415,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04823] [[54415,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05649] [[53321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05649] [[53321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06386] [[57002,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06386] [[57002,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08147] [[55691,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08147] [[55691,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09341] [[57893,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09341] [[57893,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09411] [[58011,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09411] [[58011,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09822] [[57350,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09822] [[57350,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10217] [[57777,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10217] [[57777,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10639] [[61399,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10639] [[61399,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11342] [[59926,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11342] [[59926,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11878] [[59454,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11878] [[59454,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12218] [[59874,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12218] [[59874,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12825] [[62529,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12825] [[62529,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13070] [[62806,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13070] [[62806,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13607] [[62335,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13607] [[62335,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14178] [[61754,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14178] [[61754,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14619] [[65347,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14619] [[65347,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14746] [[65474,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14746] [[65474,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15233] [[64985,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15233] [[64985,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15352] [[64928,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15352] [[64928,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15993] [[63521,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15993] [[63521,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16454] [[34334,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16454] [[34334,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16473] [[34305,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16473] [[34305,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16509] [[34341,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16509] [[34341,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16694] [[34670,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16694] [[34670,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16771] [[34779,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16771] [[34779,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16904] [[33872,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16904] [[33872,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16940] [[33908,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16940] [[33908,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17167] [[34135,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17167] [[34135,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17197] [[34165,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17197] [[34165,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17277] [[34085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17277] [[34085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17344] [[34200,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17344] [[34200,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:17681] [[33609,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17752] [[33536,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17752] [[33536,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17970] [[32874,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17970] [[32874,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18008] [[32768,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18008] [[32768,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18118] [[32926,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18118] [[32926,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18698] [[36690,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18698] [[36690,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18785] [[36665,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18785] [[36665,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18880] [[36760,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18880] [[36760,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23080] [[40048,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23080] [[40048,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24108] [[39028,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24108] [[39028,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24525] [[39317,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24525] [[39317,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25036] [[42900,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25036] [[42900,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25556] [[42380,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25556] [[42380,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25680] [[41480,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25680] [[41480,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26199] [[40975,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26199] [[40975,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27021] [[45013,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27021] [[45013,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27223] [[44047,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27223] [[44047,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27768] [[43552,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27768] [[43552,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28668] [[43428,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28668] [[43428,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29168] [[47016,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29168] [[47016,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29497] [[46433,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29497] [[46433,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:30064] [[45864,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30301] [[45061,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30301] [[45061,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30583] [[45359,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30583] [[45359,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30923] [[48787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30923] [[48787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31870] [[47654,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31870] [[47654,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01771] [[49331,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01771] [[49331,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02239] [[52967,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02239] [[52967,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02379] [[53011,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02379] [[53011,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02650] [[52226,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02650] [[52226,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03847] [[51551,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03847] [[51551,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04013] [[51701,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04013] [[51701,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05108] [[54700,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05108] [[54700,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05997] [[53557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05997] [[53557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06260] [[56876,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06260] [[56876,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06590] [[57318,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06590] [[57318,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07114] [[56722,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07114] [[56722,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08053] [[55597,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08053] [[55597,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08498] [[59242,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08498] [[59242,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08667] [[59267,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08667] [[59267,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08806] [[58430,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08806] [[58430,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09218] [[57946,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09218] [[57946,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09869] [[57557,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09869] [[57557,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10193] [[57737,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10193] [[57737,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10579] [[61195,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10579] [[61195,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11052] [[60788,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11052] [[60788,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11450] [[60130,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11450] [[60130,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11935] [[59591,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11935] [[59591,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12335] [[63095,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12335] [[63095,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12461] [[63221,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12461] [[63221,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12994] [[62618,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12994] [[62618,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13421] [[62005,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13421] [[62005,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13544] [[62128,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13544] [[62128,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15239] [[64991,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15239] [[64991,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16153] [[63809,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16153] [[63809,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16341] [[63885,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16341] [[63885,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16997] [[33853,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16997] [[33853,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17194] [[34162,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17194] [[34162,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18599] [[36607,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18599] [[36607,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19687] [[35519,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19687] [[35519,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20622] [[38614,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20622] [[38614,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21668] [[37628,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21668] [[37628,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23293] [[40101,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23293] [[40101,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23419] [[40227,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23419] [[40227,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24621] [[42613,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24621] [[42613,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25576] [[42416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25576] [[42416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26013] [[41925,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26013] [[41925,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26556] [[41444,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26556] [[41444,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26865] [[44713,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26865] [[44713,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27419] [[44355,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27419] [[44355,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27525] [[44509,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27525] [[44509,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27937] [[43897,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27937] [[43897,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28205] [[43125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28205] [[43125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29001] [[46865,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29001] [[46865,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29673] [[46513,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29673] [[46513,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30100] [[46028,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30100] [[46028,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31082] [[48946,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31082] [[48946,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31551] [[48487,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31551] [[48487,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00618] [[50226,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00618] [[50226,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00763] [[50339,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00763] [[50339,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01777] [[49321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01777] [[49321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02971] [[52675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:02971] [[52675,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03454] [[52006,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03454] [[52006,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04062] [[51590,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04062] [[51590,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04342] [[54958,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04342] [[54958,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04435] [[55051,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04435] [[55051,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04596] [[55212,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04596] [[55212,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06312] [[57072,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06312] [[57072,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06820] [[56572,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06820] [[56572,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06952] [[56688,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06952] [[56688,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07483] [[56163,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07483] [[56163,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08837] [[58589,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08837] [[58589,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09425] [[57993,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09425] [[57993,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10283] [[61043,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10283] [[61043,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10719] [[61319,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10719] [[61319,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10866] [[60458,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10866] [[60458,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12305] [[63049,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12305] [[63049,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12454] [[63230,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12454] [[63230,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13020] [[62596,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13020] [[62596,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13275] [[62851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13275] [[62851,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13406] [[61958,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13406] [[61958,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13614] [[62326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13614] [[62326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16501] [[34349,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16501] [[34349,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17114] [[33922,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17114] [[33922,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17737] [[33553,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17737] [[33553,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18913] [[36793,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18913] [[36793,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19085] [[36053,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19085] [[36053,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20228] [[35164,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20228] [[35164,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20579] [[38459,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20579] [[38459,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21181] [[38117,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21181] [[38117,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21908] [[37836,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21908] [[37836,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23044] [[40028,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23044] [[40028,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23200] [[40184,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23200] [[40184,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23421] [[40229,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23421] [[40229,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24559] [[39351,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24559] [[39351,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24770] [[42650,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24770] [[42650,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25032] [[42896,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25032] [[42896,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26560] [[41368,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26560] [[41368,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27197] [[44133,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27197] [[44133,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27650] [[43610,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27650] [[43610,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:27826] [[43754,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28452] [[43388,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28452] [[43388,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29110] [[47086,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30051] [[45883,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30051] [[45883,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30303] [[45063,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30303] [[45063,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30899] [[48875,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30899] [[48875,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31733] [[48557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31733] [[48557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32718] [[47510,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32718] [[47510,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00433] [[51177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00433] [[51177,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00802] [[50554,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00802] [[50554,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01217] [[49817,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01217] [[49817,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01509] [[50109,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01509] [[50109,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01650] [[49194,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01650] [[49194,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01753] [[49281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01753] [[49281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01845] [[49517,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01845] [[49517,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01942] [[49614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:01942] [[49614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02331] [[53059,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02331] [[53059,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02661] [[52285,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02661] [[52285,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02941] [[52517,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02941] [[52517,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03093] [[51789,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03093] [[51789,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03487] [[52167,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03487] [[52167,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03564] [[52148,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03564] [[52148,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03788] [[51348,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03788] [[51348,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04499] [[55243,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04499] [[55243,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05607] [[54207,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05607] [[54207,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06230] [[56846,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06230] [[56846,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06389] [[57005,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06389] [[57005,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06641] [[57257,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06641] [[57257,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06741] [[56333,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06881] [[56505,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06881] [[56505,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07505] [[56073,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07505] [[56073,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07568] [[56264,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07568] [[56264,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07896] [[55424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07896] [[55424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08119] [[55791,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08119] [[55791,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08478] [[59206,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08478] [[59206,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08580] [[59356,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08580] [[59356,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08689] [[59305,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08689] [[59305,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08955] [[58531,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08955] [[58531,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09209] [[58785,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09209] [[58785,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09376] [[58104,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09376] [[58104,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09884] [[57540,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10939] [[60643,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10939] [[60643,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12357] [[63005,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12357] [[63005,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12856] [[62560,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12856] [[62560,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13001] [[62609,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13001] [[62609,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13182] [[62758,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13182] [[62758,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13611] [[62323,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13611] [[62323,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13690] [[62242,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13690] [[62242,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14160] [[61704,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14160] [[61704,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14203] [[61731,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:14203] [[61731,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15024] [[64744,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15024] [[64744,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15222] [[64814,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15222] [[64814,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15325] [[64901,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15325] [[64901,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15664] [[64360,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15664] [[64360,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16476] [[34308,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16476] [[34308,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16879] [[34743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16879] [[34743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17135] [[33975,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17135] [[33975,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17299] [[34251,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17299] [[34251,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17581] [[33525,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17581] [[33525,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17693] [[33605,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17693] [[33605,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17784] [[33568,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17784] [[33568,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17971] [[32875,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17971] [[32875,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18497] [[36377,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18497] [[36377,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19030] [[35854,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19030] [[35854,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19228] [[36164,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19228] [[36164,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20088] [[34848,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20088] [[34848,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20218] [[34978,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20218] [[34978,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20539] [[38499,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20539] [[38499,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20697] [[38529,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20697] [[38529,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20855] [[38703,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20855] [[38703,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20984] [[38816,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20984] [[38816,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21395] [[38347,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21395] [[38347,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21552] [[37480,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21552] [[37480,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21590] [[37390,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21590] [[37390,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21870] [[37686,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21870] [[37686,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22555] [[40515,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22555] [[40515,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22697] [[40689,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22697] [[40689,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23065] [[40001,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23065] [[40001,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23162] [[39970,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23162] [[39970,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24043] [[39859,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24043] [[39859,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24513] [[39321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24513] [[39321,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24810] [[42674,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24810] [[42674,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24993] [[43001,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25434] [[42242,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25434] [[42242,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25884] [[41796,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25884] [[41796,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26704] [[44552,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26704] [[44552,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27213] [[44053,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27213] [[44053,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28109] [[43925,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28109] [[43925,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28606] [[43494,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28606] [[43494,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29264] [[46088,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29264] [[46088,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29494] [[46446,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29494] [[46446,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29941] [[45741,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29941] [[45741,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30016] [[45848,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30016] [[45848,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30183] [[46015,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30183] [[46015,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30486] [[45390,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30486] [[45390,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30604] [[45524,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30604] [[45524,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30798] [[48662,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30798] [[48662,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30934] [[48782,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:30934] [[48782,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31070] [[48902,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31070] [[48902,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31213] [[49077,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:31213] [[49077,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-33.local:31944] [[47760,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32292] [[47228,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32292] [[47228,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32462] [[47254,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32462] [[47254,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32550] [[47486,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:32550] [[47486,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00493] [[51125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:00493] [[51125,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00624] [[50216,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:00624] [[50216,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:00964] [[50588,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01048] [[49728,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01048] [[49728,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01621] [[49165,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01621] [[49165,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02536] [[53168,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02536] [[53168,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02835] [[52555,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02835] [[52555,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03192] [[51744,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03192] [[51744,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03271] [[51871,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03271] [[51871,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03326] [[51878,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03326] [[51878,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03473] [[52169,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03473] [[52169,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03706] [[51234,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03706] [[51234,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03854] [[51542,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03854] [[51542,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03904] [[51480,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03904] [[51480,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04017] [[51689,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04017] [[51689,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04248] [[54976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04248] [[54976,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04613] [[54365,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04613] [[54365,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04986] [[54562,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04986] [[54562,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05279] [[53959,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05279] [[53959,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:05314] [[53914,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05314] [[53914,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:05489] [[54057,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:05489] [[54057,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06159] [[56919,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06159] [[56919,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06202] [[56930,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06202] [[56930,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06242] [[56890,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06242] [[56890,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06598] [[57246,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:06598] [[57246,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06703] [[56439,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06703] [[56439,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07047] [[56799,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07047] [[56799,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07114] [[56722,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07114] [[56722,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07169] [[55897,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:07169] [[55897,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07503] [[56087,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07503] [[56087,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07944] [[55632,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08585] [[59345,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08585] [[59345,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08608] [[59384,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08608] [[59384,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08716] [[58452,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:08716] [[58452,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09042] [[58634,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09042] [[58634,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09173] [[58765,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09173] [[58765,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09225] [[57937,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09225] [[57937,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09274] [[57954,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09274] [[57954,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09698] [[58298,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09698] [[58298,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09923] [[57499,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09923] [[57499,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10060] [[57620,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10060] [[57620,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10726] [[61374,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10726] [[61374,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10813] [[60517,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:10813] [[60517,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10901] [[60621,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10901] [[60621,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11366] [[59966,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11601] [[60169,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:11601] [[60169,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11731] [[60299,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11731] [[60299,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11883] [[59443,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11883] [[59443,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12188] [[59844,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12188] [[59844,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13025] [[62649,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13025] [[62649,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13337] [[62017,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13337] [[62017,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13522] [[62090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13522] [[62090,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13651] [[62219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13651] [[62219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14250] [[61938,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14250] [[61938,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14622] [[65350,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14622] [[65350,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15413] [[64109,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15413] [[64109,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15558] [[64158,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:15558] [[64158,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16243] [[63787,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16243] [[63787,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:16576] [[34456,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16576] [[34456,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:16840] [[34704,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:16840] [[34704,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17824] [[33784,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17824] [[33784,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18410] [[33202,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18410] [[33202,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19187] [[36011,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19187] [[36011,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:19321] [[36129,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19321] [[36129,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19798] [[35598,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19798] [[35598,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20007] [[34943,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20007] [[34943,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20328] [[35120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20328] [[35120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20466] [[35242,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20466] [[35242,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20614] [[38622,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20614] [[38622,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20926] [[38886,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20926] [[38886,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21467] [[38275,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21467] [[38275,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21633] [[37593,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:21633] [[37593,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22521] [[37281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:22521] [[37281,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23153] [[39977,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23153] [[39977,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23488] [[40344,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23488] [[40344,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23544] [[40352,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23544] [[40352,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23660] [[39476,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23660] [[39476,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23745] [[39577,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23745] [[39577,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24782] [[42646,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24782] [[42646,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25592] [[42400,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25592] [[42400,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25903] [[41847,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25903] [[41847,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26248] [[41168,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26248] [[41168,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26281] [[41201,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26281] [[41201,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26527] [[41415,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26527] [[41415,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26632] [[44624,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26632] [[44624,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:26881] [[44889,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26881] [[44889,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26980] [[44860,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26980] [[44860,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27346] [[44170,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27346] [[44170,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27490] [[44346,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27490] [[44346,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28037] [[43997,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28037] [[43997,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28169] [[43089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28169] [[43089,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28445] [[43333,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:28445] [[43333,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29358] [[46326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29358] [[46326,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29861] [[45821,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29861] [[45821,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:30811] [[48643,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:30811] [[48643,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:31770] [[47682,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:31770] [[47682,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:32141] [[48085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:32141] [[48085,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:01963] [[49651,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:01963] [[49651,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:02639] [[52247,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:02639] [[52247,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:03878] [[51582,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03878] [[51582,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:03984] [[51656,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:03984] [[51656,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04145] [[54889,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:04145] [[54889,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:04458] [[55090,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:04458] [[55090,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06273] [[57049,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06273] [[57049,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:06975] [[56679,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:06975] [[56679,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07303] [[56031,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07303] [[56031,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:07695] [[55383,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:07695] [[55383,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:08631] [[59375,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:08631] [[59375,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09112] [[58816,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09112] [[58816,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09431] [[57999,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:09431] [[57999,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:09721] [[58273,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:09721] [[58273,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:10309] [[60957,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:10309] [[60957,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11679] [[60359,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11679] [[60359,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:11961] [[59617,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:11961] [[59617,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12325] [[63101,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12325] [[63101,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:12644] [[63292,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12644] [[63292,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12696] [[63424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12696] [[63424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:12807] [[62559,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:12807] [[62559,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13348] [[62076,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:13348] [[62076,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:13829] [[61533,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:13829] [[61533,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:14136] [[61792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14136] [[61792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14187] [[61747,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14187] [[61747,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14268] [[61924,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14268] [[61924,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14441] [[65073,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:14441] [[65073,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:15700] [[64268,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:15700] [[64268,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17179] [[34115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17179] [[34115,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17338] [[34274,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17433] [[33345,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:17433] [[33345,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:17910] [[33710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17910] [[33710,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17986] [[32794,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:17986] [[32794,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:18090] [[33010,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18090] [[33010,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:18776] [[36608,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:18776] [[36608,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19618] [[35578,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19618] [[35578,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:19899] [[35811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:19899] [[35811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20277] [[35181,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20277] [[35181,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:20405] [[35309,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20405] [[35309,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:20865] [[38873,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:20865] [[38873,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:21245] [[38053,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:21245] [[38053,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22454] [[37358,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22454] [[37358,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:22988] [[40852,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:22988] [[40852,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23239] [[40095,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:23239] [[40095,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:23746] [[39578,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:23746] [[39578,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24314] [[39074,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24314] [[39074,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24704] [[42712,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24704] [[42712,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:24938] [[42802,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24938] [[42802,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:24994] [[43002,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:24994] [[43002,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25259] [[42227,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25259] [[42227,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25389] [[42357,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25389] [[42357,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25667] [[41499,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:25667] [[41499,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:25982] [[41766,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:25982] [[41766,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:26009] [[41921,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:26009] [[41921,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:27471] [[44311,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:27471] [[44311,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:28001] [[43833,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:28001] [[43833,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29324] [[46292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29324] [[46292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-33 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-33 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-33.local:29683] [[46507,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29683] [[46507,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-33.local:29713] [[45641,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-33.local:29713] [[45641,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 {"realtime":75536.94,"usertime":71985.68,"systime":470.78,"memmax":56584,"memavg":0}