-------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:03113] [[19841,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:03113] [[19841,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:04337] [[20825,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:06581] [[22557,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:07227] [[23955,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:07459] [[23691,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:09866] [[26402,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10888] [[27424,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:10888] [[27424,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:10982] [[27470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:10982] [[27470,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11376] [[28120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11376] [[28120,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11455] [[27927,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11455] [[27927,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13220] [[29196,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13220] [[29196,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:14825] [[30785,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:14825] [[30785,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:17771] [[1219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:17771] [[1219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:17909] [[1117,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:17909] [[1117,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:18532] [[2508,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:18532] [[2508,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:19015] [[3055,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21962] [[5218,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:21962] [[5218,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:22446] [[5638,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:22446] [[5638,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23652] [[7628,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24769] [[8553,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24769] [[8553,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24992] [[8200,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24992] [[8200,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25085] [[8277,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25085] [[8277,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:25289] [[9057,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:25289] [[9057,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:25653] [[9629,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25653] [[9629,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:25879] [[9407,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:25879] [[9407,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26580] [[9852,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:26580] [[9852,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:27517] [[10965,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:27676] [[11700,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:27676] [[11700,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:28444] [[11956,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:28444] [[11956,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:28579] [[11787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:28579] [[11787,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:29728] [[13704,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:29728] [[13704,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:29848] [[13616,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:29848] [[13616,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30298] [[14322,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30298] [[14322,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30436] [[14156,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30436] [[14156,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30489] [[14001,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:30489] [[14001,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30658] [[13930,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:30658] [[13930,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:32596] [[16124,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:32596] [[16124,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:01528] [[17488,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:03673] [[20465,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:03673] [[20465,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:03835] [[20307,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:03835] [[20307,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:04026] [[19986,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:04026] [[19986,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:05269] [[21821,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:05269] [[21821,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:07107] [[23147,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:07107] [[23147,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10179] [[26219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:10179] [[26219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10637] [[26661,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:10637] [[26661,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11193] [[27153,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11193] [[27153,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13289] [[29249,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13289] [[29249,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13451] [[29987,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13451] [[29987,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:14342] [[31150,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:14342] [[31150,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:14459] [[31187,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:14459] [[31187,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:14824] [[30784,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:14935] [[31743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:14935] [[31743,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:15162] [[31378,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:16053] [[32541,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:16053] [[32541,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:16763] [[211,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:16763] [[211,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:18458] [[2482,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:18458] [[2482,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:19448] [[2640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:19448] [[2640,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:19969] [[4009,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:19969] [[4009,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:20097] [[3881,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:20097] [[3881,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:20570] [[4594,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:20570] [[4594,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:20895] [[4151,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21166] [[4870,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:21166] [[4870,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21377] [[4649,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:21377] [[4649,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21594] [[5618,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:21594] [[5618,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:22421] [[5693,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:22421] [[5693,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23970] [[7178,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:23970] [[7178,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24769] [[8553,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24769] [[8553,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24937] [[8385,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24937] [[8385,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25059] [[8267,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25059] [[8267,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:25444] [[8908,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26732] [[10692,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:26732] [[10692,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30402] [[14186,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30402] [[14186,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31902] [[15670,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:31902] [[15670,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:32187] [[15379,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:32304] [[16280,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:32403] [[16187,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:32403] [[16187,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:00465] [[16505,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:00465] [[16505,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:00923] [[16947,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:00923] [[16947,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:02699] [[19235,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:02699] [[19235,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:04474] [[20690,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:04474] [[20690,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:07341] [[23813,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:07341] [[23813,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08008] [[24288,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08008] [[24288,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:09175] [[25215,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09175] [[25215,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10621] [[26837,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10868] [[27612,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:10868] [[27612,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11077] [[27373,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11077] [[27373,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11906] [[28458,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11906] [[28458,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13193] [[29217,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:13193] [[29217,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:14943] [[31735,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:14943] [[31735,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:15024] [[31512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:16524] [[292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:16524] [[292,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:17256] [[704,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:17256] [[704,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:19675] [[3443,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:19675] [[3443,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:20746] [[4258,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:20746] [[4258,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21007] [[5031,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:21007] [[5031,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21095] [[5071,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:21095] [[5071,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21668] [[5388,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21991] [[5199,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:21991] [[5199,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:22254] [[5958,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:22254] [[5958,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:23364] [[6892,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23981] [[7173,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24036] [[7244,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24174] [[8134,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:24174] [[8134,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24464] [[7736,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24464] [[7736,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24671] [[8695,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24671] [[8695,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26440] [[9952,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:26440] [[9952,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26896] [[10424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:26896] [[10424,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:27811] [[11531,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:27811] [[11531,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:28923] [[12627,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:28923] [[12627,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30349] [[14117,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:30349] [[14117,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30653] [[13845,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30653] [[13845,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31515] [[15027,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:31515] [[15027,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31716] [[14924,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:31716] [[14924,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:00475] [[16499,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:00475] [[16499,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:02203] [[18739,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:02203] [[18739,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:03152] [[19960,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:03152] [[19960,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:04533] [[20509,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:04533] [[20509,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:04866] [[21162,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:04866] [[21162,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:05499] [[21715,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:06041] [[22065,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:06041] [[22065,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:06326] [[22814,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:06326] [[22814,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:06590] [[22550,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:06590] [[22550,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:06967] [[23199,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:06967] [[23199,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:07041] [[23081,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:07041] [[23081,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:07680] [[24488,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:07936] [[24232,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:07936] [[24232,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08712] [[25504,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08712] [[25504,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08950] [[25438,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:08950] [[25438,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09003] [[25219,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09003] [[25219,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09047] [[25343,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09047] [[25343,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09091] [[25131,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09091] [[25131,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:09224] [[26016,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:09495] [[25791,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09495] [[25791,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11466] [[28002,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11466] [[28002,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11865] [[28657,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11865] [[28657,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:12063] [[28343,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:12063] [[28343,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13583] [[29863,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:13583] [[29863,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:13678] [[29894,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13678] [[29894,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:14650] [[30866,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:14650] [[30866,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:15030] [[31518,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:15030] [[31518,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:15087] [[31559,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:15087] [[31559,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:15309] [[31333,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:15309] [[31333,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:15642] [[31922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:15642] [[31922,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:17950] [[1974,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:17950] [[1974,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:18404] [[1612,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21809] [[5273,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:21809] [[5273,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:22238] [[6006,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:22238] [[6006,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:23210] [[6914,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23401] [[6849,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:23401] [[6849,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23504] [[6776,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:23504] [[6776,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23834] [[7346,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:23834] [[7346,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24273] [[8057,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:24273] [[8057,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:24570] [[7762,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:24570] [[7762,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:25393] [[8857,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:25393] [[8857,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26108] [[9300,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:26108] [[9300,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26370] [[9898,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:26370] [[9898,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26483] [[9947,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:26483] [[9947,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:26600] [[9792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:26600] [[9792,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:27539] [[10811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:27539] [[10811,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:28679] [[12719,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:28679] [[12719,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:29144] [[12400,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:29144] [[12400,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:29683] [[12891,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:29683] [[12891,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30028] [[13540,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30028] [[13540,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30639] [[13831,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30639] [[13831,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30755] [[14731,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:30755] [[14731,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31241] [[15265,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:31241] [[15265,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:02674] [[19418,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:02674] [[19418,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:03239] [[19727,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:03239] [[19727,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:04205] [[20933,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:04205] [[20933,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:07088] [[23064,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:07088] [[23064,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08014] [[24294,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08014] [[24294,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10131] [[26171,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:10131] [[26171,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11944] [[28416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11944] [[28416,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13541] [[30029,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:13541] [[30029,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:14665] [[30945,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:16192] [[32488,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:16192] [[32488,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:17214] [[662,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:17214] [[662,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:18565] [[2349,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:18565] [[2349,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:18913] [[2121,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:18913] [[2121,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:20128] [[3848,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:20128] [[3848,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:21128] [[4896,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:21128] [[4896,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:22963] [[6171,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:22963] [[6171,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:27319] [[11039,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:27319] [[11039,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:29077] [[12349,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:29077] [[12349,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31000] [[14512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:31000] [[14512,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31548] [[14996,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:31548] [[14996,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:31886] [[15654,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:31886] [[15654,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:32544] [[16008,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:32706] [[15978,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:32706] [[15978,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:04881] [[21177,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:04881] [[21177,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:05093] [[21069,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:05093] [[21069,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08598] [[24638,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08598] [[24638,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- [pd-compute-3-30.local:09746] [[26554,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11434] [[27906,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11434] [[27906,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:12115] [[28411,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:12115] [[28411,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:12310] [[29118,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:12310] [[29118,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13075] [[29371,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13075] [[29371,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:13700] [[29740,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:13700] [[29740,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:14234] [[30258,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:14234] [[30258,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:15735] [[31967,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:15735] [[31967,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:16783] [[39,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:16783] [[39,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:18952] [[2976,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:18952] [[2976,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:22654] [[6614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:22654] [[6614,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:22947] [[6155,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:22947] [[6155,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:23520] [[6728,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:23520] [[6728,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:25499] [[8755,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25499] [[8755,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25647] [[9607,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:25647] [[9607,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:27648] [[11688,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:27648] [[11688,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:28442] [[11954,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:28442] [[11954,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:30612] [[13884,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:30612] [[13884,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:01324] [[17540,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:01324] [[17540,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:03682] [[20426,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:03682] [[20426,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:04603] [[20563,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:04603] [[20563,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:05987] [[22219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:05987] [[22219,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:06939] [[23219,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:06939] [[23219,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08207] [[24999,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08207] [[24999,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08417] [[24905,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08417] [[24905,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08684] [[24644,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:08684] [[24644,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:08773] [[25581,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:09320] [[26048,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09320] [[26048,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:09488] [[25784,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09488] [[25784,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09507] [[25739,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:09507] [[25739,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:09675] [[25699,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09675] [[25699,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09693] [[25717,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:09693] [[25717,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10238] [[26198,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:10238] [[26198,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:10592] [[26824,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:10592] [[26824,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11234] [[27210,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11234] [[27210,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11270] [[28078,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11270] [[28078,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11491] [[27979,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11491] [[27979,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11942] [[28430,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:11942] [[28430,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:11984] [[28536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:11984] [[28536,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:12013] [[28485,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 [pd-compute-3-30.local:12013] [[28485,0],0] ORTE_ERROR_LOG: Data unpack had inadequate space in file util/show_help.c at line 513 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:12256] [[28232,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:12256] [[28232,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- [pd-compute-3-30.local:12839] [[29583,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 [pd-compute-3-30.local:12839] [[29583,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file util/show_help.c at line 507 -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- -------------------------------------------------------------------------- By default, for Open MPI 4.0 and later, infiniband ports on a device are not used by default. The intent is to use UCX for these devices. You can override this policy by setting the btl_openib_allow_ib MCA parameter to true. Local host: pd-compute-3-30 Local adapter: qib0 Local port: 1 -------------------------------------------------------------------------- -------------------------------------------------------------------------- WARNING: There was an error initializing an OpenFabrics device. Local host: pd-compute-3-30 Local device: qib0 -------------------------------------------------------------------------- {"realtime":21348.05,"usertime":20131.96,"systime":167.16,"memmax":43676,"memavg":0}